Can polyacrylamide powder be added to sewage?

Polyacrylamide powder can’t be directly added to sewage. It must be dissolved in water before use, and then use polyacrylamide solution for sewage treatment. Use clean water to dissolve PAM powder. Generally, just use water at room temperature, no need to heat it. However, the dissolution is very slow when the water temperature is lower than 5℃.

What is polyacrylamide PAM flocculant?

The following are their detailed introduction and specifications. As a polymer flocculant for water treatment, polyacrylamide pam flocculant can absorb suspended particles in water, act as a link and bridge between particles, make fine particles form relatively large flocs, and speed up the speed of precipitation.

What are the different types of polyacrylamide (PAM)?

So PAM chemical can be used for petroleum exploration, water treatment, textile, papermaking, mineral processing, medicine, agriculture and other industries, etc. The polyacrylamide (PAM) can be divided into four types, they are anionic PAM, cationic PAM, nonionic and amphoteric PAM. The following are their detailed introduction and specifications.

How to dissolve Pam powder?

Use clean water to dissolve PAM powder. Generally, just use water at room temperature, no need to heat it. However, the dissolution is very slow when the water temperature is lower than 5℃. Increasing the water temperature will speed up the dissolution rate, but above 40℃ will accelerate the degradation of the PAM polymer and affect use effects.

What is Pam flocculant used for?

In sewage treatment, the use of PAM flocculant can increase the utilization rate of water recycling and can also be used for sludge dewatering. In industrial water treatment, it is an important formulation agent. PAM polymer is a kind of multifunctional oilfield chemical treatment agent.

What is Pam polymer used for?

PAM polymer is a kind of multifunctional oilfield chemical treatment agent. It is widely used in the process of drilling, cementing, completion, workover, fracturing, acidification, water injection, water plugging and profile control, and tertiary oil recovery operations in oil production.